Xen and windows

Use Tab to move between elements, and Space or Enter to select. For general help, press F1. Installing XenServer overwrites data on any hard drives that you select to use for the installation. Back up data that you wish to preserve before proceeding. Following the initial boot messages and the Welcome to XenServer screen, select your keymap keyboard layout for the installation.

If a System Hardware warning screen is displayed and hardware virtualization assist support is available on your system, see your hardware manufacturer for BIOS upgrades.

XenServer ships with a broad driver set that supports most modern server hardware configurations. However, if you have been provided with any additional essential device drivers, press F9. The installer steps you through installing the necessary drivers. Only update packages containing driver disks can be installed at this point in the installation process.

However, you are prompted later in the installation process to install any update packages containing supplemental packs. Press F10 and follow the instructions displayed on the screen to set up FCoE.

For information about configuring the physical switch and the array to support FCoE, see the documentation provided by the vendor. Use the Page Up and Page Down keys to scroll through and read the agreement. Upgrade : If the installer detects a previously installed version of XenServer, it offers the option to upgrade.

For information about upgrading your XenServer host, see Upgrade from an existing version. Restore : If the installer detects a previously created backup installation, it offers the option to restore XenServer from the backup. Choose which disk s you would like to use for virtual machine storage.

Information about a specific disk can be viewed by pressing F5. If you want to use Thin Provisioning to optimize the utilization of available storage, select Enable thin provisioning.

Citrix Virtual Desktop users are strongly recommended to select this option in order for local caching to work properly. For details, see IntelliCache. To install from a CD, choose Local media. Choose OK to proceed. If the computer has multiple NICs, select one of them to be used to access the XenServer installation media files.

If you choose Static configuration , enter details as appropriate. Indicate if you want to verify the integrity of the installation media. If you select Verify installation source , the SHA checksum of the packages is calculated and checked against the known value. Verification can take some time. Make your selection and choose OK to proceed. Set and confirm a root password, which XenCenter uses to connect to the XenServer host.

If you select Manually specify , enter the hostname for the server in the field provided. If you manually specify the hostname, enter a short hostname and not the fully qualified domain name FQDN. If you select Manually specify , enter the IP addresses of your primary required , secondary optional , and tertiary optional DNS servers in the fields provided. Select your time zone by geographical area and city. You can type the first letter of the desired locale to jump to the first entry that begins with this letter.

Specify how you want the server to determine local time: using NTP or manual time entry. Make your selection, and choose OK to proceed. Choose OK. If you elected to set the date and time manually, you are prompted to do so during the installation. Once set, choose OK to proceed. If you are installing from CD, the next screen asks if you want to install any supplemental packs from a CD. If you plan to install any supplemental packs provided by your hardware supplier, choose Yes.

If you choose to install supplemental packs, you are prompted to insert them. After the server reboots, XenServer displays xsconsole , a system configuration console. Make note of the IP address displayed. XenCenter must be installed on a Windows machine that can connect to the XenServer host through your network. Ensure that. NET framework version 4. Windows support in XenEnterprise is expected to be available in a beta program beginning Nov.

XenSource plans to add Windows support in the first quarter of next year, XenSource executive say. XenEnterprise for Windows includes a number of features including Xen and guest- operating-system installers, tools to migrate physical systems into virtual machines and a wide range of management capabilities. The average Windows IT professional can get this up and running in 10 minutes. Windows virtual machines also can be run on the free version of Xen, available here.

It is better performing in the XenEnterprise product because of proprietary drivers that XenSource embedded into Xen to support Windows, Crosby says. The No. The safest and most reliable hypervisor to use for security-first environments due to lean architecture, advanced security features, and an industry-leading security disclosure process.

Maturity, isolation, security features, real-time support, fault-tolerance, and a flexible architecture make the Xen Project hypervisor a perfect match for embedded and automotive systems. All rights reserved. The Linux Foundation has registered trademarks and uses trademarks.